Home/Welding & Soldering/Welding Machines/PTWT8001 Plastic tube welding tools

PTWT8001 Plastic tube welding tools

CODE: PTWT8001

Applying to:

PP-R,PB,PE,PE-RT

Power Source:

Corded Electric

Rated Power:

800W

Voltage:

220-240V

Welding diameter:

16-32mm

All features

Socket-fusion welder for PP-R, PB, PE and PE-RT water pipes, 16–32 mm, 800W, with sockets 16, 20, 25, 32 mm — for plumbing installation and repair.

Full description

Description

The INGCO PTWT8001 is a socket-fusion welder for plastic water pipes. It heats the pipe end and the fitting together on a pair of heated sockets, then the two are pushed together and fuse into one solid, leak-free joint — the standard way of joining PP-R plumbing.

What it is good for

Hot and cold water plumbing in PP-R, PB, PE and PE-RT pipe, 16–32 mm diameter
New installations and repairs in homes, buildings and workshops
Plumbers and installers who need clean, permanent pipe joints

Good practice

PP-R is normally fused at about 260 °C — set the temperature and let the heater reach it before starting
Cut the pipe square and clean, heat pipe and fitting at the same time, then join straight without twisting
Follow the pipe manufacturer's heating and cooling times for each diameter

Key specifications

Voltage: 220–240 V, 50/60 Hz
Rated power: 800W
Welding diameter: 16–32 mm
Working temperature: 0–300 °C
For PP-R, PB, PE and PE-RT pipe

In the box (per INGCO)

Welding sockets: 16, 20, 25, 32 mm
Metal carry box

The heating plate and sockets reach up to 300 °C — never touch them, keep the tool away from flammable materials and let it cool fully before packing it away.

Specifications are as published by INGCO for model PTWT8001. Usage guidance reflects general pipe-fusion practice — always follow the tool's manual and the pipe manufacturer's instructions.